Date: 22 May 2006 18:04:41 GMT From: Dave Hinz <DaveHinznospamcop.net> Subject: Re: 1994 900S, Dashboard, Climate control area.
On Mon, 22 May 2006 14:00:30 -0400, orka <orkanospamh.edu> wrote: > The knob selector for defroster/dash/floor control quit working. Can you describe "quit working" a bit better? It's a vacuum "switch", if the hose cluster came off the back you'll probably be hearing hissing and possibly have running problems due to a large vacuum leak. > Can anyone > tell me how to get to the knobs? Do I have to remove that entire center > piece or do they come out as a group.. in either case, how? 4 vertical screws (torx) visible from underneath the dash face. Undo just the right 3 should be plenty. Watch that when you pull it out you don't also disconnect the hot/cold valve shaft from it's valve on the firewall. Take out the left speaker grille in the dash so you can see what you're doing by looking through the windscreen. Having 8 foot long arms helps as well.