Date: Mon, 31 Jul 2006 11:27:08 -0400
From: Ben <jimnospamcom>
Subject: Re: Purge Valve Solenoid Connector Bust


Thanks! Fixed! For less than 50c. Thanks again, Ben chewy wrote: > The purge valve should be located at the right strut tower. 2 pin > connector, 2 vacuum lines. Leaning on the fender, looking down it > should be either between strut tower and engine or strut tower and > airbox. > > > Ben wrote: > >>Hi all, >> >>99, 9-3 - the dealer tells me that I have a wire broken off the purge >>valve solenoid connector - hence Check Engine come on. >> >>I'm handy, electronics-wise and I can solder this wire, or change the >>connector myself? Is this valve in a hard to reach area, engine wise? >> >>Dealer wants 1.5 hours labor to do this (~ $120). >> >>Thanks, Ben > >

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2021 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]