Date: 21 Sep 2006 16:22:19 GMT
From: John B <>
Subject: Re: '94 900S Rear wheels not verticle

On 21 Sep 2006 08:03:13 -0700, wrote: > > I'm wondering ... okay, this his hokey ... but if I were to very > carefully put a floor jack under the center of the rear axle and push > up ... bend it straight? I figure I don't have much to lose. > I wouldn't bother with that if I were you. Even if the weight of the car were enough to bend the axle (which I doubt), your chances of actually making it better are pretty slim. > Also; is axle replacement something a reasonably mechanically-inclinded > person can do in their garage?? Yes, I think so. I've had the rear axle mostly detached from my c900 two times, and it was a *much* easier job the second time for two reasons: the experience of doing it the first time, and having air tools. So if I were you, I would arm myself with a good shop manual, good tools, and much more time than you think it will take ;) John ps- also don't overlook the fact that you will have the brake line apart and will therefore need to know how to bleed the brakes -- Posted via a free Usenet account from

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2020 - The Saab Network -
For usage guidelines, see the Mission and Purpose Page.
[Contact | Site Map | on Facebook | on Twitter | Shop Amazon via TSN | Site Donations]