Date: Tue, 19 Sep 2006 16:57:53 GMT
From: - Bob - <uctraingnospamanet.com>
Subject: Re: wanted - saab special press tool 89 95 409 for c900 balljoints


On Tue, 19 Sep 2006 09:31:36 +0100, "Tom" <saabtechnospamnnect.com> wrote: >The easier method is to remove the two through bolts on the lower joint, >remove the nut on the cv and then swing the hub outwards, thus allowing >access for a more sturdy ball joint tool. >The upper arm spacer tool is still available in the UK priced at 9.83, If >you are stuck for one I can order it for you, Regards, Tom, Saabtech. Keeping in mind I know nothing of classic 900's... on my NG 900 there is a similar issue. I ended up using a smaller pitman arm or tie rod type tool to remove the BJ.

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2019 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]