Click Banner for Details on this Classified

Date: Tue, 13 Feb 2007 22:51:55 GMT
From: Paul Halliday <>
Subject: Re: CIS Injection Cold Start Injector Seals

in article, Don at wrote on 12/02/2007 20:53: > I have an '85 900 8-valve which uses the Bosch CIS injection. The > fuel delivery banjo fitting that's on top of the Cold Start Injector, > aka Cold Start Valve is leaking fuel. The cause is deterioration of > the rubber in the washer/seals on mounted at the top and bottom of the > banjo fitting. > > Does anyone know of a source of these seals? No luck with my local > dealer, and - at least so far. I'm sorry - I can't suggest a supplier, but it is possible to run without the cold start injector as long as where you live is not under about 5 degrees C for much of the time. The fuel supply can be removed and blocked off until you find the seals (remember to unplug the electrical supply to it, too). Happy hunting :) Paul 1989 900 Turbo S

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2021 - The Saab Network -
For usage guidelines, see the Mission and Purpose Page.
[Contact | Site Map | on Facebook | on Twitter | Shop Amazon via TSN | Site Donations]