Date: Sun, 15 Apr 2007 21:38:11 +0100
From: Andrew Sinclair <>
Subject: Re: P0341 Error code on SAAB 900

In message <jr0v139ros9t2cj64nrl3hl5i8trnms4minospamcom>, - Bob - <> writes >On Fri, 13 Apr 2007 13:19:22 GMT, - Bob - <> >wrote: > > >>Here's a photo of the CPS location. > >Whoops, here: > > >Parts here: No, the fault indicates the CAM (not CRANK) shaft position sensor, that's inside the distributor; see here; But first check the wiring from the distributor back as cracked insulation or dirty connections could be the problem before embarking on major surgery on your distributor. Andy -- Andrew Sinclair

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2020 - The Saab Network -
For usage guidelines, see the Mission and Purpose Page.
[Contact | Site Map | on Facebook | on Twitter | Shop Amazon via TSN | Site Donations]