Date: Fri, 13 Apr 2007 13:19:22 GMT
From: - Bob - <>
Subject: Re: P0341 Error code on SAAB 900

On 12 Apr 2007 19:54:42 -0700, "designer52" <> wrote: >I have a '96 SAAB 900S (non-turbo). There was the "Check Engine" sign >on and I found out that the computer showed error code P0341 (Camshaft >Position Sensor A - Bank 1 CKT Range/Performance). I think the C.P. >sensor is inside the Ignition Distributor (please correct me if I'm >wrong). I see a lot of oil on the bottom of the distributor cap. Is >this normal? Could the problem be that there is oil leaking into the >distrubutor and causing the sensor to malfunction? Any help would be >appreciated. Thanks. Here's a photo of the CPS location. Sounds like you may have two different problems - distributor seal and CPS. It might just be a dirty connector - try cleaning the engine area connections for the CPS.

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2020 - The Saab Network -
For usage guidelines, see the Mission and Purpose Page.
[Contact | Site Map | on Facebook | on Twitter | Shop Amazon via TSN | Site Donations]