Date: Wed, 27 Jun 2007 18:23:10 +0100 From: "kingdoodlesquat" <neggerscheggersnospamtseacatspam.com> Subject: Re: Front discs
> > Hi all, > > > > I need to change my front discs on my 9000, but according to the Haynes > > manual, it appears I'll have to disconnect the brake line to the calipers to > > do it. However, I've stuck my head in the wheel arch & it looks like all I > > need to do is undo 2 bolts behind the disc to remove the entire caliper > > without the need to disconnect the brake line. > > > > Could someone enlighten me please if the Haynes is correct - it'll be too > > late to take to a mechanic if I follow the manual & get into problems, > > > > Cheers > > > > kds :-) > > Haynes is blowing smoke if it tells you to disconnect the brake line. > Removing the two 19 mm bolt head carrier bolts will do. > cheers, I thought Haynes was being a bit over the top.