Date: Thu, 12 Jul 2007 06:12:36 -0400
From: Network <>
Subject: Re: Torx socket for 2002 9-5 brake caliper

Walt Kienzle wrote: > "Network" <> wrote in message > news:46956ea4$0$8956$ >> I was surprised to find out that my 2002 9-5 had big Torx screws holding >> the brake calipers. I tried to use a 12 point 5/8 inch socket to remove the >> screws but it rounded the screw heads. Does anyone know where can I >> purchase this special socket? Thanks > > If a 5/8" fit inside the Torx screw, you likely need a T80 bit (yikes!) > Here is one at Amazon: > and > it uses 3/4" drive. I won't shock you with the price, but a T70 socket > costs about 10% of what this costs (also at Amazon). > > Here is the chart I used to determine the size > I hope this helps. Good > luck. > > Walt Thanks for the last link, Walt. According to the table I need an E-20. All I need to do now is find out who has got one. I know Sears doesn't

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2020 - The Saab Network -
For usage guidelines, see the Mission and Purpose Page.
[Contact | Site Map | on Facebook | on Twitter | Shop Amazon via TSN | Site Donations]