Date: Fri, 20 Jul 2007 00:36:39 +0000 (UTC) From: Craig's Saab C900 Site <c900nospam.apana.org.au> Subject: Re: opening rear seat in 81 turbo c900 when there's no pull-handle!
Craig's Saab C900 Site <c900nospam.apana.org.au> writes: >Hi, >In order to fully trace the wiring run for the fuel sender I'm trying to >get the back seat slid forward and tilted up, but the seat has no >pull-handle to release the latch like all my other 900's have. Was the >rear seat latch setup different in the really early 900's? >Anybody know of a way without forcing one's hand down under the back of >the seat and trying to do a contortionist act to firstly find then >secondly release the latching mechanism that holds it in place? 8-) My wife and I seem to have worked it out! Apparently the seat is only latched on the left side (not in the centre as with the later 900's), and there's meant to be a spring-loaded release rod with a knob poking out through the carpet under the seat. The knob is missing, and the rod was 'floating' under the seat (still attached to the mechanism). Will be taking some pics to put in the galleries to show the difference between the two securing methods! Craig. -- Craig's Saab C900 Page at | Craig's Classic Saab Workshop - Sydney .au http://lios.apana.org.au/~c900 | http://www.classicsaab.net and other URL's Email: c900nospam.apana.org.au | For Saab 99/C900/9000 Enthusiasts World-Wide! Alternate: saabonautnospaml.com | Web-forums, galleries, library, links, etc.