1999-2009 [Subscribe to Daily Digest] |
[Main 95 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: It goes back on reverse of disassemble Posted by vvack0matic [Email] (#1443) [Profile/Gallery] (more from vvack0matic) on Tue, 9 Apr 2013 18:55:43 In Reply to: Re: It goes back on reverse of disassemble, Ric, Tue, 9 Apr 2013 18:38:00 Members do not see ads below this line. - Help Keep This Site Online - Signup |
Yes the one by the firewall removing the one nut dose it Jacking the transmission up to high the motor hits the heater or a/c hoses that runs into the car, back by the fire wall. Don't have the trans jacked up that high or it will also pinch the hoses creating damage and its doubtful the motor will move over with the screwdriver. The hoses right next to the mount at the firewall are the hoses that the motor is hitting when the transmission is jacked up, its those hoses that all the pressure is on that's lifting the car lower the trans just a tad.
I used a series of 1/2" extensions and a breaker bar hooked to the end of the extensions from the top of the motor, that nut loosened with ease.
posted by 70.196.131...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.