1979-1993 & 94 Conv [Subscribe to Daily Digest] |
 | [Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Shifter Linkage Bush Posted by JimBlake [Email]  (#141)  [Profile/Gallery]
(more from JimBlake) on Tue, 13 Sep 2005 05:59:05
In Reply to: Shifter Linkage Bush, Gap4g61t, Fri, 9 Sep 2005 18:51:10 Members see ZERO ads on the bulletin boards and get more feature. - Help Keep This Site Online - Signup |
When that shifter box bushing went bad in my '89, it was way more than 1mm of sloppy sideways motion. The rubber part of the bushing was torn & grossly out-of-place. I replaced it all from the inside without disconnecting the shift rod.
The bushing set has 2 parts, a white nylon part that's split; this can spread just enough to get it onto the shaft. Then there's a big rubber bushing that can be stretched over the loop on the aft end of the shift rod (inside the box). Both of these seemed like they were just about ready to break but they went on.
Once the 2 parts are on the shaft, you can put the nylon bushing inside the rubber bushing; then work the rubber bushing into the hole in the shift box.
, Tue, 13 Sep 2005 05:59:05 <-- Viewing This Message
, Fri, 9 Sep 2005 20:35:02, Sat, 10 Sep 2005 06:41:27
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
 |
 |
 |
 |
 |
