1979-1993 & 94 Conv [Subscribe to Daily Digest] |
[Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: power steering pump bracket bushings Posted by Roger D [Email] (#1121) [Profile/Gallery] (more from Roger D) on Sat, 9 Jun 2007 14:49:51 In Reply to: power steering pump bracket bushings, slaaaab, Thu, 7 Jun 2007 12:02:57 Members do not see ads below this line. - Help Keep This Site Online - Signup |
The nut is 8mm X 1.25. Same thread as the many 8mm nuts throughout the engine. The sleeve is 8mm on the inside just like the exhaust sleeves but is shorter.It is the identical sleeve that is used where the pass. motor mount bracket bolts to the head or the sleeves where the 2 allen head bolts hold the AC compressor to the head.It is 10mm long. The sleeve is 13mm on the out side so the washer inside hole diameter is slightly over 13mm. A washer with a half inch hole would be close. You can steal a sleeve from one of the 2 locations noted above and use a shorter 8mm bolt or a stack of washers in it's place.
posted by 24.10...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.