1979-1993 & 94 Conv [Subscribe to Daily Digest] |
[Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Injectors for 900 Conv Turbo -93 Posted by vvack0matic [Email] (#1443) [Profile/Gallery] (more from vvack0matic) on Sat, 19 Jul 2008 14:29:28 In Reply to: Injectors for 900 Conv Turbo -93, bewaba, Sat, 19 Jul 2008 13:07:49 Members do not see ads below this line. - Help Keep This Site Online - Signup |
if you are a d.i.y.er (do it yourself-er) and have the capability of working on the motor, its only going to cost you 6 bux (perhaps 10) to fix them.
stop by eeuroparts online store and order 8 injector gaskets.
when they arrive unbolt the fuel rail, 2 on the motor and one at the front of the rail, along with the 3.0bar and pull the fuel rail along with the injectors off the top of the motor. (might need to do a little wiggleing to get the injectors free)... ummm
wiggle the fuel rail, not your body.
then take the fuel rail and set it on a bench or a picnic table and change out the gaskets, once the rail in in hand its all self explanatory.
(just a note: when unbolting the fuel rails 3 bolts make sure to hold the rail firmly so as it dose not bend with all the wrenching on the bolts)
doing the hole job is more fun than work, being..... it just fun to play with injectors.
if for some reason the injectors cracked (not likely)
report back to the board, with the news
posted by 72.250.83...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.