1979-1993 & 94 Conv [Subscribe to Daily Digest] |
[Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Replace Outer Left CV Boot - Need New Drive Axle Nut??? Posted by StoicBlue87 [Email] (#1829) [Profile/Gallery] (more from StoicBlue87) on Fri, 16 Dec 2016 12:54:02 In Reply to: Replace Outer Left CV Boot - Need New Drive Axle Nut???, JoeMiller, Fri, 16 Dec 2016 12:32:14 Members do not see ads below this line. - Help Keep This Site Online - Signup |
Outer CV boots are usually replaced by extracting the entire axle from the car and working down to the torn/rotten boot from the inside end of the axle.
Meaning, you'd jack up the car after putting spacers beneath the upper A-arms, remove the brake caliper and hang it out of the way in the wheel well (without disconnecting the hydraulic line), loosen and slide the inner-CV boot-clamp off the boot, loosen and extract the tie-rod bolt from the axle knuckle, then loosen and extract the top- and bottom-universal joint bolts and in one clean and careful swoop move, pull the axle out of the wheel well and drop it brake-disc down onto a workbench. Clean and remove the inner-tripod bearing, loosen the small clamp for the inner-CV boot and slide the inner-CV boot off the axle. This gives you free reign to remove the old outer CV boot and replace it after packing with new CV grease.
I'm sure there's a lot of links in this newsgroup on how to do it besides these few sentences. And I don't recall the steps listed in the manual but...
You don't need to fuss with the axle nut for a CV-boot replacement.
Best of luck.
->Posting last edited on Fri, 16 Dec 2016 12:55:06.
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.