Automatic - Throttle Pressure Cable Adjustment - Saabnet.com Bulletin Board
I set the throttle pressure cable to the recommended distance of the crimped stop. It shifts at high rpm's (3000+) with very light pedal pressure. I loosened the cable and the crimped stop is against the threaded barrel. Still shifts are rather high rpm's (2700) and abrupt engagement. I loosened the cable about 2 turns of the nuts on the threaded barrel and it is shifting smoother and at lower rpm's. Why would this cable need to be very loose versus the recommended crimp stop distance? I might try loosening it some more to see what happens. I did not notice shifting of the transmission in the past, but over the last few years it has been very noticeable because of the higher rpm's before gear changes.
Any thoughts on what is happening?
posted by 24.147.14...
Posts in this Thread:
Post a Followup
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
This is a moderated bulletin board - Posting is a privilege, not a right.
Unsolicited commercial postings are not allowed (no Spam). Please, no For Sale or Wanted postings, SERIOUSLY.
Classifieds are to be listed in The Saab Network Classifieds pages.
This is a problem solving forum for over 250,000 Saab owners, so expect to see
problems discussed here even though our cars are generally very reliable. This is not an anything goes
type of forum. Saabnet.com has been a moderated forum since 1988. For usage guidelines, see the
Saabnet.com Mission and Purpose Page. Please remember that you are
not anonymous. Site Contact | Site Donations | Other Sites by SP -
Poverty2Prosperity.org | RandomScreening.com
Your address is: 18.104.22.168 - Using CCBot/2.0 (http://commoncrawl.org/faq/) - Logged.
Site Members do not see red text instructions, skyscraper, nor box ads.
Click here to see all
the Site Membership Benefits!