Re: Tweekin' the turbo - Pt. II - Saab 900 Bulletin Board - Saabnet.com
The banner above is an advertisment - if it asks you to download software, please ignore.
Site News -
4/9 Saab Owners' Convention Day Pass Raffle |
3/26 M Car Covers (by State of Nine)
[General |
Members |
C900 |
9000 |
NG900 & OG93 |
93 |
95 |
NG95 |
99 |
Sonett |
Vintage Models |
Clubs |
Other Cars |
FAQs |
Gifts |
Member Photo Galleries |
Member Directory |
Classifieds |
Manuals |
*Buddy Registry |
*Mileage Registry |
Polls |
What's New |
Raffle |
Photo of the Month |
Sponsors]
[Main C900 Bulletin Board | BBFAQ |
Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Tweekin' the turbo - Pt. II
Posted by Mark J (more from Mark J) on Thu, 23 Nov 2000 15:10:23
In Reply to: Tweekin' the turbo - Pt. II, Gary C., Thu, 23 Nov 2000 10:18:51
Members do not see ads below this line. - Help Keep This Site Online - Signup
As suspected, the APC is not working. This is referred to as "base boost". Not sure about the noise you are hearing but it could be detonation...sounds from under the hood often seem to come from other places. In any case, I would not recommend driving the car this way. There is a potential for engine damage since the APC system is not online to protect it and base boost is set too high. I recommend returning the wastegate arm to where it was originally. Then troubleshoot APC. When you have fixed it, boost should go to the top of the yellow zone in third gear.
If you do not have a Bentley manual now is the time, it is the bible of SAAB repair. Don't bother with the Haynes - it is practically useless. You will need the troubleshooting steps and illustrations in Bentley that show the component locations. It is not difficult, if you can set the wastegate arm and disconnect the solenoid you can do it. Checking and cleaning the connections on everything is a good first step. Also check all vacuum lines in the engine very carefully. It is common for a bad electric connection or busted vacuum line to cause base boost. You may need a voltmeter or test light to do continuity tests.
On my 84T, base boost was caused by a faulty connection to the knock sensor. It is bolted to the engine block under the intake manifold between cylinders 2+3. Thats a good simple place to start. Also check the connection to the APC computer. It's a grey plastic box under the left side of the back seat with a big connector. Good luck.
- Mark
1984 900T
1978 99T
Posts in this Thread:
Members do not see ads below this line. - Help Keep This Site Online - Signup
Post a Followup
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
StateOfNine.com
|
SaabClub.com
|
Jak Stoll Performance
|
M Car Covers
|
Ad Available
|
Random Saabnet.com Member Gallery Photos (Click Image)
This is a moderated bulletin board - Posting is a privilege, not a right.
Unsolicited commercial postings are not allowed (no spam). Please, no For Sale or Wanted postings, SERIOUSLY.
Classifieds are to be listed in The Saab Network Classifieds pages.
This is a problem solving forum for over 250,000 Saab owners, so expect to see
problems discussed here even though our cars are generally very reliable. This is not an anything goes
type of forum. Saabnet.com has been a moderated forum since 1988. For usage guidelines, see the
Saabnet.com Mission and Purpose Page. Please remember that you are
not anonymous. Site Contact | Site Donations | Other Sites by SP -
Poverty2Prosperity.org | Run Club Menlo Park | ScreenBot
Site Members do not see red text instructions, bottom of the page anchor ads, or box ads.
Click here to see all
the Site Membership Benefits!