1994-2002 [Subscribe to Daily Digest] |
[Main NG900 & OG93 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: ACC error code 1 internal control module failure Posted by SPG Jr [Email] (#1830) [Profile/Gallery] (more from SPG Jr) on Wed, 27 Jul 2016 04:25:31 In Reply to: ACC error code 1 internal control module failure, elpasosaab [Profile/Gallery] , Tue, 26 Jul 2016 16:34:39 Members do not see ads below this line. - Help Keep This Site Online - Signup |
DIC is probably urgent, if that fails you are stranded (If you replace it before it completely fails, hang on to it, it may be good enough to get you home if your next unit fails at some point). Its by far the most expensive item but the good news is eEuro has them discounted right now. And since the plugs are right there you may as well do them as well. That is about 1/2 hour's DIY work. I think eEuro has an instructional video on U tube. You don't want to ignore the thermo too long, you won't go too far if that fails. Coolant temp sensor perhaps the least urgent and can be done independently of the thermo. Both are DIY but will take longer and might involve some mess, esp CTS where some coolant will escape (unless you do it as part of a flush when there's no coolant in the engine). The CTS is a bit of a pain to access and replace if I recall, right behind some hoses or wires, odd angle for the ratchet. I think there's good instructions on the board. You can do all of that stuff in a couple hours.
Not too familiar with the ACC failure, if no one has better dx i would say contact BBA Remanufacturing and confirm that's part of the rebuild they do. If its just the display failing, they can fix you up.
Doug
2010 9-3
2000 Viggen
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.