1994-2002 [Subscribe to Daily Digest] |
[Main NG900 & OG93 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: removing pistons from fixed calipers Posted by Bernie [Email] (#1501) [Profile/Gallery] (more from Bernie) on Sun, 1 Sep 2019 10:08:44 In Reply to: removing pistons from fixed calipers, bender [Profile/Gallery] , Sun, 1 Sep 2019 09:59:45 Members do not see ads below this line. - Help Keep This Site Online - Signup |
Hello,
Yes the easiest way is to get the old one back in there then use a small c clamp or something like that to keep it from moving all the way out and use either air or I usually use an old master cylinder I have to push the other piston out. Or you could hook it up to the car with the clamp installed and use the cars hydraulic system to push it out. Air works but you have to be careful as they may come out with alot of force. A lot of damaged fingers over the years to people doing that. Good Luck, Bernie
_______________________________________ George Riggin Specialty Automotive Current Saabs 1993 900 Turbo Conv. 1993 900 Turbo Conv. Auto 2003 9-3 Conv 2004 9-5 Arc Sedan 2005 9-3 SS 4 door 2005 9-3 SS Conv 2007 9-5 Aero Sedan 1986 900 Turbo Conv A few parts cars also
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.