BTW, you can use hi or hi/low bulbs for the inner set--I couldn't find hi-beam only, so I'm running hi/lows--and use either filament just by swapping the wires in the socket. You can also wire your Aux switch to have the driving lights on at will (not just with the main hi-beams)--the relay is energized by a signal from the hi-beam light in the dash, so if you use a lead from the dash lights instead (I took a lead off from the dash rheostat) you can turn the driving lights on or off any time your main lights are on. If you do this, you might want to use the low beam filaments on the driving lights to avoid blinding oncoming traffic, or at the very least make sure they are aimed down. Posts in this Thread:
Post a Followup
![]()
The content on this site may not be republished without permission. Copyright © 1988-2012 - The Saab Network - saabnet.com.This is a moderated bulletin board - Posting is a privilege, not a right. Unsolicited commercial postings are not allowed (no Spam). Please, no For Sale or Wanted postings, SERIOUSLY. Classifieds are to be listed in The Saab Network Classifieds pages. This is a problem solving forum for over 250,000 Saab owners, so expect to see problems discussed here even though our cars are generally very reliable. This is not an anything goes type of forum. Saabnet.com has been a moderated forum since 1988. For usage guidelines, see the Saabnet.com Mission and Purpose Page. Please remember that you are not anonymous. Site Donations Your address is: 50.16.36.153 - Using CCBot/2.0 - Logged. |