Date: Wed, 17 May 2006 15:39:40 -0400 From: DFRANet <dfranospamulink.com> Subject: Re: Door Skin Removal - 1996 9000 CS
Nasty Bob wrote: > Good morning, the original poster is back from holidays. > > Welcome Back! > > Thank-you for all the responses. By "door skin" I meant the panels > (cards) covering the inside of the two rear doors. > > Thought so ;) > > I have to remove these to make some repairs. > > Now you know how... sort of. Good luck & let us know how you get on. > I got the rear right card off. Took about 20 minutes. There should be 5 screws but mine only had 3. The two missing screws were the ones that hold the interior door handle in place. From the other side I was able to determine that the missing screws were 5mm Torx, 1/2" in length. My local supplier had the black HEX version in stock so I used them. Unfortunately I found out that one of the round black plastic hinge mechanisms was broken. It keeps two metal rods together and attaches to the door frame. I need to locate at least two of these items. Does anyone know where they can be ordered from ? Kirk R.