|The Saab Network Mailing List FAQ|
[ Prev by Date ] [ Next by Date ] Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Clutch hydraulic bleeding [saabnet.com]
Posted by Jack Brooks - http://saabnet.com/tsn/forms/e.php3? (more from Jack Brooks - http://saabnet.com/tsn/forms/e.php3?) on Tue, 3 Aug 2004 20:52:20
In Reply to: Clutch hydraulic bleeding [saabnet.com], Jack Brooks - http://saabnet.com/tsn/forms/e.php3?, Sun, 1 Aug 2004 23:35:32
> Some times it just takes a long long time and lots of fluid
> to get all the air out, experience with 89 9000T so i
> understand. Simply reply to this message to send a response.
I had not opened up the bleed nipple enough to allow the air to go down to
the slave and purge. What I did was to fill the reservoir to the top and
used my compressors rubber tip to pressurize the tiny hole at the top - 20
psi. When I opened up the bleed nipple a lot more, it finally belched out
the trapped air and I had my clutch back. It did take a bunch of fluid to
finally bleed out.
Simply reply to this message to send a response.
The Saab Network - On the Internet Since 1988
State of Nine
The Source for Saab Enthusiasts
Posts in this Thread:
|Jak Stoll Performance
|Button Ad Available
This is a moderated FAQ - Posting is a privilege, not a right.
Unsolicited commercial postings are not allowed (no Spam). Please, no For Sale or Wanted postings, SERIOUSLY.
Classifieds are to be listed in The Saab Network Classifieds pages.
This is a problem solving forum for over 250,000 Saab owners, so expect to see
problems discussed here even though our cars are generally very reliable. This is not an anything goes
type of forum. TSN has been a moderated forum since 1988. For usage guidelines, see the
TSN Mission and Purpose Page. Please remember that you are
Your address is: 22.214.171.124 - Using CCBot/2.0 (https://commoncrawl.org/faq/) - Logged.