1985-1998 [Subscribe to Daily Digest] |
[Main 9000 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Hammer drill spins the bit as per normal drill... Posted by skibumm100 [Email] (#3255) [Profile/Gallery] (more from skibumm100) on Mon, 5 Oct 2009 11:15:09 In Reply to: Re: Hammer drill spins the bit as per normal drill..., oldsaab, Fri, 2 Oct 2009 00:08:57 Members do not see ads below this line. - Help Keep This Site Online - Signup |
I just did the brakes on the CSE yesterday and the torx screws on both sides were stuck. I sprayed both with PB Nutblaster and let them soak a little. It wasn't that long ago that I did the brakes but they wouldn't budge. I tried the impact driver first and managed to round out both of the torx screws. I then used a punch and a hammer to back them out. Very easy to do if you have the technique. I just threw them out and used the locator pins to hold the rotor in place until I installed the wheels.
posted by 72.166.1...
_______________________________________ long-time listener, first-time caller Saab glutton for punishment
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.