2010-2011 [Subscribe to Daily Digest] |
[Profile/Gallery]
, Fri, 14 Mar 2014 08:05:50
Members do not see ads below this line. - Help Keep This Site Online - Signup
Updating Navigation Radio UYS for Navigation
Radio/Clock Concerns 9-4X
Service and Warranty Reference Library
Title:
Updating Navigation Radio UYS for Navigation Radio/Clock Concerns
Date:
03/18/2013
To:
All OSCs
From:
SPNA
______________________________________________
Updating Saab Navigation Radio (UYS)
In order to help those customers with Navigation radio concerns that do not wish to have their
radios repaired permanently by using United Radio we will make the update available through
IRIS.
NOTE: The OSC will be responsible for any issues that may arise during or after programming.
This update may not repair the condition and or the condition may return at a later date. The only
option left at that time is the radio repair process through United Radio.
Using a 512 MB or larger USB memory stick inset the drive into an available USB port on your
shop computer. (Make sure you use a blank or memory stick that has been formatted).
Make sure your memory stick is completely blank by (RIGHT) clicking on the memory stick
Icon in my computer. Then select "Format" (NOTE: This will erase all data on the drive). Use
the default setting for the formatting FAT32 and quick erase. Click OK
Once the memory stick has been formatted, load the NAVIGATION software ONTO the usb
DRIVE. When the transfer is complete safely remove the USB stick by right clicking the ICON
again and selecting "EJECT". You should receive a message telling you the drive is safe to
remove.
Connect the Midtronics® PSC 550 Battery Maintainer (SPS Programming Support Tool
EL-49642) or an equivalent to the battery of the vehicle.
Put vehicle in the "Accessory" position. Press and hold START button for 10 seconds do not put
your foot on the brake pedal during this time.
Turn the Navigation Radio on before inserting the USB drive into the usb port in the center
console.
With the vehicle switch in the Accessory position and the radio on, insert the USB drive into the
center console USB port.
You should see a screen similar to this when the download starts
Select OK to continue.
The radio will display the title: "Program Update" along with warnings not to interrupt power or
remove the media. A bar graph will form indicating progress and an "OK" button will appear.
PRESS the appropriate radio button or area of the screen to activate the "OK" command and
begin programming.
A status bar indicates progress.
Important: DO NOT cycle the ignition even if the view screen indicates to cycle it. At the
conclusion of the USB drive downloading to the radio, installation of the programming will
automatically begin as indicated by the white progress bar below. If the view screen instead
remains blank for more than 40 minutes, you may then cycle the ignition. This will reinitialize
the programming event. Do not remove the USB flash drive.
After the USB programming has completed the screen will go blank. (On the SRX the screen
will also lower). It is not necessary to observe the entire programming process. Once the screen
has gone blank, a white outline bar graph will appear. (Not visible on SRX due to the screen
being lowered) The downloaded programming will automatically install. Once this progress bar
fills, the screen will go blank and USB programming will be complete.
When the programming event has completed, the radio will display: Download Complete and the
version number U145
Turn OFF the ignition for 60 seconds.
Remove the USB flash drive.
The vehicle MUST now be calibrated.
Important: After completion of the USB programming event, but prior to the initialization of SPS
programming, the radio will display a Cadillac splash screen if operated. This is a normal
condition. Completion of the SAAB SPS programming below will restore the radio to the proper
splash screen for the vehicle being serviced.
Return to the SPS programming screen. Select: J-2534 MDI from the Select Diagnostic Tool and
Programming Process screen.
Select: "RAD: Radio Programming"
You must now select the proper choices for the build of the vehicle you are servicing. Refer to
the vehicle SPID label or the vehicle build information through GWM for the specific RPOs the
vehicle is equipped with.
9-5 WIS File path for whole vehicle RPO list
9-5 (9650) / 2010 / General / General / Technical description / RPO Code List
9-5Service Parts ID Label (SPID)
The vehicle service parts identification label is located in the rear compartment under the spare
tire cover. The label is use to help identify the vehicle original parts and options.
9-4X WIS File path for whole vehicle RPO list
9-4x / 2011 / Service / Saab Service US/CA / Technical data / RPO Code List
9-4X Service Parts ID Label (SPID)
The vehicle service parts identification label is located in the rear compartment under the right
rear floor compartment cover. The label is use to help identify the vehicle original parts and
options.
Once you have selected the proper vehicle options, you may initiate SPS programming. Upon
completion of this step, the radio is updated.
Important: The navigation radio will be returned to factory default values during this upgrade.
•
Important: Clock functionality may be temporarily hampered after updating until
a GPS signal is established. If your buildings service area inhibits GPS signals,
the vehicle should be moved outside to an unobstructed area prior to returning the
vehicle to the customer.
______________________________________________
Contact:
SPNA
For more
information:
SPNA
posted by 70.127.5...
, Thu, 13 Mar 2014 12:37:44, Fri, 14 Mar 2014 08:05:50
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
 |
 |
 |
 |
 |
