[Subscribe to Daily Digest] |
[Main Performance Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Banjo bolt fitting Upgrade/mod????? Posted by Inga [Email] (#2994) [Profile/Gallery] (more from Inga) on Fri, 28 Oct 2005 18:35:16 Members do not see ads below this line. - Help Keep This Site Online - Signup |
Modded C900t (Started out an 85)
Can someone tell me why it would be a good or bad idea to increase the hole size in the banjo bolts going into and out of the oil lines. One would need to make sure not to go too far so that it might leak around the copper seals. I’d also think you could flow but so much more then the surrounding banjo it’s self. Increasing that might prove to be much more difficult.
Example: The oil cooling lines for the turbo? Or the banjo bolt coming out of the block going to the turbo. (Can’t think of any more places off the top of my head. Not sure if it would be needed for the fuel lines.)
I assume it would or might increase the flow, but with that said, would it reduce the pressure. Though volume you might loose pressure. Course the pressure relief valve might help in keeping that pressure up or so I would think.
Just a thought!!
Tim
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.