In Reply to: Yea too many variables, John Williams [Profile/Gallery] , Sun, 11 Dec 2005 04:05:03

If you're going to run bigger injectors there isn't basically a need to run any another FPR than stock. Of corse it depends on what injectors you get, but greens should be plenty for you HW speck with 3.0bar.

What comes to the MAP-sensor you need to get that changed to a 3.0bar version if you contenue to run your car with the stated MAP levels. That mapping wont be to good with the std 2.5bar map sensor, due to the fact that this sensor will bottom out, ie. resolution is very poor.
For instace summit racing sells this 3.0bar sensor to resonable cost.

I dont see a connection between altitude and A/F what would cause this big of a difference. Besides the manifold pressure one should be interested in our post IC temps, to determine the O2. During a short dyno run I doubt there is much change in the value. Also the VE will be some what lower... The T5 will calculate fuel based on MAP, manifold temp and VE after that it is up to the mapping how well it keeps up with changes.

posted by 81.197.81...

• john williams pulls only change 9 psi base boost, jak , Thu, 1 Dec 2005 10:47:40
  • JAK...., Vigge, Mon, 5 Dec 2005 03:24:44
    • I know you love me :-), jak , Tue, 6 Dec 2005 20:13:50
      • Re: I know you love me :-), Vigge, Tue, 6 Dec 2005 23:34:03
        • Im gona get some viggen #s from 5000 ft if possible, jak , Wed, 7 Dec 2005 06:04:12
          • Re: Im gona get some viggen #s from 5000 ft if possible, vigge, Wed, 7 Dec 2005 12:13:51
          • It's all about pressure ratios, SteveW, Wed, 7 Dec 2005 07:48:54
            • Re: It's all about pressure ratios, Vigge, Wed, 7 Dec 2005 11:33:12
              • I keep forgetting to talk about the compressor wheels.., John Williams , Wed, 7 Dec 2005 21:37:05
                • Re: I keep forgetting to talk about the compressor wheels.., vigge, Fri, 9 Dec 2005 02:42:09
                  • Re: I keep forgetting to talk about the compressor wheels.., John Williams , Fri, 9 Dec 2005 14:00:12
                    • Re: I keep forgetting to talk about the compressor wheels.., vigge, Sat, 10 Dec 2005 11:12:22
              • Turbo car and pressure..., John Williams , Wed, 7 Dec 2005 21:12:55
                • some more, vigge, Fri, 9 Dec 2005 05:39:10
                  • Sounds about right, I just pulled the specs at 300hp., John Williams , Fri, 9 Dec 2005 13:44:33
                    • Re: Sounds about right, I just pulled the specs at 300hp., Terry, Fri, 9 Dec 2005 21:12:12
                      • Also....., Terry, Fri, 9 Dec 2005 21:47:24
                        • Thanks Terry, thats the answer I was looking for...., John Williams , Sat, 10 Dec 2005 10:06:48
                          • A/F, vigge, Sat, 10 Dec 2005 11:14:15
                            • Re: A/F, John Williams , Sat, 10 Dec 2005 16:32:03
                              • Re: A/F, vigge, Sun, 11 Dec 2005 03:39:50
                                • Yea too many variables, John Williams , Sun, 11 Dec 2005 04:05:03
                                  • Re: Yea too many variables, Vigge, Sun, 11 Dec 2005 04:26:06 <-- Viewing This Message
                                    • Re: T-5 compensate for a Mile high?, John Williams , Sun, 11 Dec 2005 09:31:34
                                      • Re: T-5 compensate for a Mile high?, vigge, Sun, 11 Dec 2005 10:06:33
                                        • Re: T-5 compensate for a Mile high?, John Williams , Sun, 11 Dec 2005 14:41:26
                                          • about the altitude, vigge, Sun, 11 Dec 2005 21:44:39
                                            • Re: about the altitude, John Williams , Mon, 12 Dec 2005 13:21:10
                              • Where are you measuring?, Drew in Houston, Sat, 10 Dec 2005 20:08:08
                                • Re: Where are you measuring?, John wiliams, Sun, 11 Dec 2005 03:33:54
  • also just to be clear, jak , Fri, 2 Dec 2005 08:11:38
  • what I know is on there?, jak , Thu, 1 Dec 2005 15:50:21
  • Re: john williams pulls only change 9 psi base boost, nathanb, Thu, 1 Dec 2005 10:59:49
    • Re: john williams pulls only change 9 psi base boost, John Williams , Thu, 1 Dec 2005 16:58:28

No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.

• Prev by Date: Yea too many variables, John Williams, Sun, 11 Dec 2005 04:05:03
• Next by Date: how do you set up base boost on a t5 system? n/m, Smeter, Sun, 11 Dec 2005 05:45:12
• Main Performance Bulletin Board

StateOfNine.com

SaabClub.com

Jak Stoll Performance

M Car Covers

Ad Available

The content on this site may not be republished without permission. Copyright © 1988-2024 - The Saab Network - saabnet.com.
For usage guidelines, see the Mission & Privacy Notice.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]

Random Saabnet.com Member Gallery Photos (Click Image)