1964-1974 [Subscribe to Daily Digest] |
Hello long lost SAAB-nuts!
My ongoing clutch/shifting problem now points to a 'freewheel problem'.. Heres the deal:
A while back I posted a question about why my Sonett grinds into reverse. A few days ago, after some time fiddling around with the clutch adjustment (and having no luck) - I noticed that my tranny has the white plastic freewheel lever, but no bolt to lock it down, nor any bar going under the dash for lockout. It can just slide around and jiggle back and forth. With the car idling, if I push it toward the firewall, I can hear some slight grinding (of the freewheel engagement teeth maybe? - or whats left of them?)
However, being bold, I noticed that when I moved the lever towards the firewall then locked it down with a bolt, while idling, the transmission will shift into reverse without grinding. Yea!! Problem solved!! Right?! ... Wrong. I happily drove to the corner store for my celebratory 6-pack. 1st gear - fine, 2nd gear felt sorta like a slipping clutch (but worse)- it finally engaged but felt very 'loaded'.
I slowed down to a near stop and heard a few pops/clicks and grinds from the tranny. I pushed in the clutch when I stopped and everything was smooth again (indicating a tranny prob).
So, after hobling home, and trying some more clutch adjusments, I'm now at the point where it just won't hardly shift at all (regardless of the freewheel lever position).
Is my best option to purchase the freewheel neutering 'fork' from MSS, or permanantly weld it (neutered via welding) - or is it time to go hunting for a used tranny?
I'm preparing to yank the engine/tranny - but would love to hear what ya think first.
-Chris Floyd
posted by 70.144.156...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.