1999-2009 [Subscribe to Daily Digest] |
[Main 95 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: 9-5 Sedan OEM Trailer Hitch Installation Instructions Posted by Paul [Email] (#792) [Profile/Gallery] (more from Paul) on Mon, 25 Sep 2006 11:22:53 In Reply to: Re: 9-5 Sedan OEM Trailer Hitch Installation Instructions, darrell [Profile/Gallery] , Mon, 25 Sep 2006 08:45:08 Members do not see ads below this line. - Help Keep This Site Online - Signup |
I have instructions on installing a Draw-tite hitch, which I purchased for my '01 9-5.
The instructions are quite simple and do not include the removal of the rear bumper. The instructions are as follows:
1) Remove spare tire and jack from trunk.
2) Remove tie-down eye (two bolts under the car and one nut in the trunk).
3) Raise hitch into position and lossely secure to vehicle at ie-down eye location using original M10 bolts.
4) Install remaining fasteners - three bolts mounted through the access slots in the side rails. Thighten all fastners
5) Seal hole left in trunk pan by removal of tie-down eye.
6) Return spare tire and jack to trunk.
Hope this helps.
Paul
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.