1999-2009 [Subscribe to Daily Digest] |
[Main 95 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
The size is Posted by crawdad [Email] (#1867) [Profile/Gallery] (more from crawdad) on Thu, 18 May 2017 08:24:10 In Reply to: Anyone know the size?, crawdad [Profile/Gallery] , Tue, 16 May 2017 11:24:33 Members do not see ads below this line. - Help Keep This Site Online - Signup |
M14 x 1.5 x 26 mm. Since I was removing the filter, I took it out and measured. It has a 12 mm head and I measured 14 mm diameter to the outside of the threads. Confusing that the EPC has both M14 and M12 listed for that turbo line bolt. The length was measured from bottom of the head to the end of the bolt without the copper washer. I don't have an oil pressure gauge/tester yet, so I don't know for sure, but there doesn't appear to be enough room to get a gauge's hose attached since it's only 1.5" or less from the oil return hose for the turbo. Maybe it needs a 90 degree adapter? So far, I've only been able to find M12 x 1.5 fuel pressure take-off banjo bolts. I would think it doesn't matter if it's for fuel. I may just have to get a regular M14 and tap a 1/8" for the pressure gauge. Or whatever size the fitting is on the gauge.
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.