1999-2009 [Subscribe to Daily Digest] |
[Main 95 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Output shaft seals Posted by Mark in Marine [Email] (#1837) [Profile/Gallery] (more from Mark in Marine) on Tue, 6 Nov 2018 17:02:22 In Reply to: Output shaft seals, S-Works, Tue, 6 Nov 2018 12:28:59 Members do not see ads below this line. - Help Keep This Site Online - Signup |
Yes -
I have been through this back in April/May time frame. I had a vibration that a new wheel bearing did not cure and the tires had been rotated and checked for balance with no change. It was the intermediate (IM) shaft bearing.
I used a hooked seal puller to pull the seals from the differential (old school - be CAREFUL not to gouge the seal seat in the diff). A new and clean squarely cut 2 foot length of 2-inch PVC pipe was my install tool for new diff seals.
See my post from back then at the link attached.
Hope this helps some.
Mark in Marine
http://www.saabnet.com/tsn/bb/9-5/index.html?bID=275653
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.