1999-2009 [Subscribe to Daily Digest] |
[Main 95 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
oil pump/sump reassembly Posted by thewheell22 [Email] (#2450) [Profile/Gallery] (more from thewheell22) on Fri, 18 Mar 2022 10:35:29 In Reply to: Re: Oil Pump Servicing, thewheell22 [Profile/Gallery] , Thu, 17 Mar 2022 13:08:18 Members do not see ads below this line. - Help Keep This Site Online - Signup |
The Felpro front main seal kit# TCS 46014 pic'd below includes the pump cover, o-ring for the oil pick up pipe under the oil pan and the front main seal seen below left. The pan gasket is separate,Felpro 1-30723. Surfaces cleaned, and after MUCH run around learning of sealants, Loctite 518 AND Permatex 51813 is OEM for the NISSAN/Bond3 sealant that Anders recommends on these. Order of this job for me >>Pump cover >> oil pan >> reattach generator >> reattach AC bracket >> AC compressor >> Power steering pump..JEEZ.. That bushing in the center of the pic comes off w/ the oil pump cover. I'll place on the crankshaft when I set the main seal.
My next task, having the both heads off, is to replace the valve stem seals, lash the valves then reassemble the heads. It'll probably be a while before I post again. I'm learning this stuff one step at a time. Any adice/tips from the members is welcomed. Happy Motoring!
->Posting last edited on Fri, 18 Mar 2022 14:50:51.
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.