1979-1993 & 94 Conv [Subscribe to Daily Digest] |
[Main C900 Bulletin Board | BBFAQ |
Prev by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: We can't keep it running....help... Posted by Dana [Email] (#2822) [Profile/Gallery] (more from Dana) on Wed, 6 Aug 2003 20:38:54 In Reply to: Re: We can't keep it running....help..., sharon, Tue, 5 Aug 2003 22:14:21 Members do not see ads below this line. - Help Keep This Site Online - Signup |
To be absolutely sure that you are getting fuel you will need to do the following:
1. Remove the hex bolts which hold down the retaining "clips" around the fuel injectors. Very gently lift the injectors up carefully not to break the plastic gas lines and place the ends of the injectors pointed into the bottom of a shallow bucket.
2. Remove the rubber bellows between the fuel distributor and the manifold intake.
3. Electrically jump out the fuel pump relay sockets which I described before and then lift the fuel distributor air flow plate up using a pair of pliers on the center bolt which secures the plate to the lifting arm.
4. Gas will spray out of the injectors each time you lift the plate. The further you lift the plate, the more the gas. If you do not have gas, then look for ethier of the following:
bad fuse #30, bad fuel pump, loose wiring connection to the pump...there is nothing else.
If you have fuel then focus on possible bad fuel pump relay, missing ignition pulses from the ignition module, or bad ignition module.
Dana
posted by 172.141.92...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.