1979-1993 & 94 Conv [Subscribe to Daily Digest] |
 | [Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: fresh oil.. no start Posted by vvack0matic [Email]  (#1443) [Profile/Gallery]
(more from vvack0matic) on Thu, 12 Feb 2009 10:23:22
In Reply to: Re: fresh oil.. no start, Raabert, Thu, 12 Feb 2009 08:52:54 Members do not see ads below this line. - Help Keep This Site Online - Signup |
there is a cluster of wires running to the starter, when the filter wrench is twisting to remove or install the oil filter these cluster of wires will be hit by the hand of the person or the handle of the wrench itself. what can happen, even though all the wires are tight attached to the starters prong, its the prong itself that protrudes out of the starter that can dislodge from the starter. if this was the case the motor would not even turn over, starter would never engage. to check if this prong dislodged from the starter with your hand grab ahold of one of the wires attached to the back of the starter and wiggle it. if you see the hole cluster bob up and down because the prong is loose this is your problem, you need to re-tighten the prong back into the starter, and then the starter will start working.
posted by 72.250.84...
, Wed, 11 Feb 2009 14:41:52, Thu, 12 Feb 2009 10:23:22 <-- Viewing This Message, Thu, 12 Feb 2009 11:18:26
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
 |
 |
 |
 |
 |
