0F: LH sensor resistance to earth 3 ohm or higher - Saab 900 Bulletin Board - Saabnet.com
The banner above is an advertisment - if it asks you to download software, please ignore.
Site News -
4/9 Saab Owners' Convention Day Pass Raffle |
3/26 M Car Covers (by State of Nine)
[General |
Members |
C900 |
9000 |
NG900 & OG93 |
93 |
95 |
NG95 |
99 |
Sonett |
Vintage Models |
Clubs |
Other Cars |
FAQs |
Gifts |
Member Photo Galleries |
Member Directory |
Classifieds |
Manuals |
*Buddy Registry |
*Mileage Registry |
Polls |
What's New |
Raffle |
Photo of the Month |
Sponsors]
[Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
0F: LH sensor resistance to earth 3 ohm or higher
Posted by Siegfried (more from Siegfried) on Sat, 9 Oct 2010 16:41:40
In Reply to: Advanced SRS help needed, Saab Junkie, Fri, 8 Oct 2010 15:35:49
Members do not see ads below this line. - Help Keep This Site Online - Signup
SJ,
There's no need to start with SRS ECU replace but first you're to doublecheck and ensure that LH knock sensor has a strong ground (electrical to body) connection. Probably that nut that holds the sensor is loosen or such.
Saab Service Manual 8:6 Airbag M90+, p/no # 340257
Page 33, Test procedure 5
Fault code 0F: LH front sensor, resistance to earth 3 ohm or higher
Fault code 10: RH front sensor, resistance to earth 3 ohm or higher
Undo the securing screws for the front sensor. Clean the contact surfaces between the sensor and its bracket on the body, and also the thread on the captive nut.
Lubricate the thread and cavity in the captive nut.
Lubricate the threads on the new securing screws and fit the screws.
Use lubricant, part no. 45-3007309, or Ford Motorcraft silicone dielectric compound or an equivalent lubricant with good electrical conductivity.
Delete the fault codes and wait, with ignition on, for at least 35 seconds.
Check that the code has been cleared.
Best luck,
Zig
P.S.
SRS ECU is to be reset with either Tech2 tool + SRS-Tech2 adapter or with special SRS tester in order to wipe out DTC. SRS Diagnostic Trouble Codes are not deleted if SRS is just powered down.
posted by 77.37.1...
Posts in this Thread:
Members do not see ads below this line. - Help Keep This Site Online - Signup
Post a Followup
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
StateOfNine.com
|
SaabClub.com
|
Jak Stoll Performance
|
M Car Covers
|
Ad Available
|
Random Saabnet.com Member Gallery Photos (Click Image)
This is a moderated bulletin board - Posting is a privilege, not a right.
Unsolicited commercial postings are not allowed (no spam). Please, no For Sale or Wanted postings, SERIOUSLY.
Classifieds are to be listed in The Saab Network Classifieds pages.
This is a problem solving forum for over 250,000 Saab owners, so expect to see
problems discussed here even though our cars are generally very reliable. This is not an anything goes
type of forum. Saabnet.com has been a moderated forum since 1988. For usage guidelines, see the
Saabnet.com Mission and Purpose Page. Please remember that you are
not anonymous. Site Contact | Site Donations | Other Sites by SP -
Poverty2Prosperity.org | Run Club Menlo Park | ScreenBot
Site Members do not see red text instructions, bottom of the page anchor ads, or box ads.
Click here to see all
the Site Membership Benefits!