1979-1993 & 94 Conv [Subscribe to Daily Digest] |
[Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: NA to turbo conversion - parts to go Posted by 900 Aero [Email] (#425) [Profile/Gallery] (more from 900 Aero) on Wed, 20 Apr 2011 18:15:50 In Reply to: NA to turbo conversion - parts to go, ocn, Wed, 20 Apr 2011 17:20:35 Members do not see ads below this line. - Help Keep This Site Online - Signup |
Typically especially with a 2.1 you just add the smaller TE05-12B turbo inter-cooler and all and run a reduced boost level in other words a light pressure turbo (LPT) setup with a higher compression ratio than a full turbo. If you're going with a 2.0 full on turbo engine APC and all then you will need to go with all wire looms from a turbo application. A LPT conversion works great with the 2.1's 3mm larger bore and the EZK system has a knock sensor so you can keep the higher compression ratio without engine damage as long as not much over base boost is run.
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.