1979-1993 & 94 Conv [Subscribe to Daily Digest] |
[Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: How to remove back seat cushion from a '91 Convertible? Posted by bill schultz [Email] (#811) [Profile/Gallery] (more from bill schultz) on Thu, 15 May 2014 09:25:55 In Reply to: Re: How to remove back seat cushion from a '91 Convertible?, Tom G [Profile/Gallery] , Thu, 15 May 2014 06:55:26 Members do not see ads below this line. - Help Keep This Site Online - Signup |
That system is used on the earlier cars. On your '91 the bottom cushion is held down by spring clips only and pulls straight up and out from the front edge with a strong tug. The seat back is held in by two bolts beneath the seat bottom, I think, but there are two ten mm bolts located at the top left and right ends of the seat back hidden by the boot bottom cover BEHIND the seat back accessed through a slot-cut through the fabric at each side. (R&L top sides) With the top up and a flashlight stick your head into the boot cavity and look at the back of the seat back. You'll see the slots. Remove the two bolts all the way and the cushion will almost fall out. On re installing screw the bolts into the back of the seat a bit because you'll notice the steel frame has slotted holes where you insert the boltheads. You may also have to remove the two plastic seat belt covers before the removal as I recall. Phew!!!!
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.