1979-1993 & 94 Conv [Subscribe to Daily Digest] |
 | [Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Motive Products 0100 bleeder review Posted by Ilovemountains [Email]  (#1318) [Profile/Gallery]
(more from Ilovemountains) on Sun, 1 Jun 2014 10:10:18
Members do not see ads below this line. - Help Keep This Site Online - Signup
|
I don't think there is a review section on here, if there is I apologize! I wanted to share my experience with the Motive Products 0100 pressure bleeder. I bought it to bleed the clutch on my 85 900s that I tried to manually bleed but lost pressure and gave up. I cleaned my reservoir out and topped it off, I did not add fluid to the bleeder so I don't have to clean it out. I pumped the bleeder up to around 20PSI and cracked the valve on the slave open and voila! Nasty old fluid and tons of air bubbles came flowing out nicely. I just watched the fluid level in the reservoir, I removed the bleeder and pumped the clutch a few times, 1000% back in business. I then re-bled it some more and got a little more dark fluid out. Its good as new now and took all of about 10 minutes. I picked it up on Summit Racing with 2 day shipping for less than $70, worth every cent! Just my .02! Matt
->Posting last edited on Sun, 1 Jun 2014 10:10:38.
, Sun, 1 Jun 2014 10:10:18 <-- Viewing This Message
, Sun, 1 Jun 2014 21:04:13
, Sun, 1 Jun 2014 16:52:10
, Sun, 1 Jun 2014 20:09:36, Sun, 1 Jun 2014 22:42:03, Sun, 1 Jun 2014 11:20:50
, Tue, 3 Jun 2014 11:57:04
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
 |
 |
 |
 |
 |
