1979-1993 & 94 Conv [Subscribe to Daily Digest] |
Members do not see ads below this line. - Help Keep This Site Online - Signup
Long story short, the wiring to the ignition and fuel pump have been mucked with. Long, long ago (after the ignition switch broke) a friend put in a contact switch and an off/on switch. That worked, but more recently someone else undid that, tried something else (which didn't work) and left me trying to translate the information in Bentley's into physical connections. It's slow slogging.
First, where does the wire with the spade connector on the starter connect?
Next, there's the thick white hot wire going into the passenger side. The wiring diagram looks like it goes to the 29-pole connector 152A, yet it's coming into the passenger compartment and, at one time, was connected to three improvised wires, one of which connected to an on/off toggle. What those wires in turn connected to, I don't know.
Separately, there's a momentary switch connected on one side to the red/yellow (50) starter motor wire. I think it wants to connect to the gray (30) positive wire to the block, but I'm not sure how it connects up with the other switch.
More questions to come, I'm sure, but at least this would be a start...
Thanks in advance for your help.
->Posting last edited on Thu, 25 Oct 2018 00:21:39.
, Thu, 25 Oct 2018 14:12:41
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
 |
 |
 |
 |
 |
