1985-1998 [Subscribe to Daily Digest] |
[Main 9000 Bulletin Board | BBFAQ |
Prev by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Head Removal Posted by Gene N [Email] (#1094) [Profile/Gallery] (more from Gene N) on Thu, 31 Oct 2002 08:03:47 In Reply to: Head Removal, Gerald Reeves, Wed, 30 Oct 2002 18:33:37 Members do not see ads below this line. - Help Keep This Site Online - Signup |
If you take the electrical plugs off the injectors, remove the 2 ground bolts, and remove the 2 bolts holding the cable harness rail, you can then drop the harness down and get in there with a box wrench or ratchet. You might find the ratchet easier if you use a universal joint and extension.
Alternately, you can leave the intake manifold on the head and pull them both out together (which is what I did). The two of them together are pretty heavy(60-80 lbs), so you might want to have help when you do it. When I put the head back on, I attached the intake manifold after the head was mounted and torqued down.
posted by 155.104.24...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.