1985-1998 [Subscribe to Daily Digest] |
| [Main 9000 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
diagnosing ABS light Posted by Henry Helfman [Email] |
I bought this car with a known bad front wheel bearing and intermittent ABS light. It's either on or of when starting; doesn't have to move to fault. When the car starts with the ABS light off, it works fine for the entire drive. I figured the reluctor ring could have been off alignment due to the bearing. After replacing the bearing, ABS light seems to be almost always on. I remember cleaning the grime off the sensor but don't think I cleaned the ring. Of course it could also be either of the other 3 sensors, pump or module.
Once recently I got the light to stay off for one run by disconnecting and reconnecting the module with the system off.
I just tried the easiest thing first- somebody gave me 2 spare ABS modules and swapped one to no improvement.
Is there a way to diagnose (light flash codes perhaps?) the fault in the system?
This is my 3rd 9k and the first one I had with an ABS issue. I still have the wrecked 95 aero with no abs fault as a potential part donor.
Henry
94 aero 5spd 115k
, Mon, 2 Mar 2009 11:01:28
, Mon, 2 Mar 2009 08:59:14
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |
