1985-1998 [Subscribe to Daily Digest] |
| [Main 9000 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
How to test the oil pressure light system Posted by sam96CS [Email] In Reply to: Oil Pressure Light, T. Christopher, Wed, 12 Sep 2012 10:56:12 Members see ZERO ads on the bulletin boards and get more feature. - Help Keep This Site Online - Signup |
1. (multimeter required) Check that you have 12 volts at the wire that connects to the oil pressure sender with the ignition in the on position. If so, then the electrical circuit is okay.
2. Ground the wire that connects to the oil pressure sender and turn the ignition to the on position. The oil can light in the pictogram should turn on. If not, then the bulb is bad.
3. If you have 12 volts at the sender wire and the oil can light turns on when the wire is grounded, then the sender is bad. This is a failure-prone part that is cheap to replace.
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |
