1985-1998 [Subscribe to Daily Digest] |
 | [Main 9000 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Rebuilding ACC servos. Posted by Ari [Email]  (#2847) [Profile/Gallery]
(more from Ari) on Fri, 4 May 2001 16:25:39
In Reply to: Re: Rebuilding ACC servos., Daniel, Fri, 4 May 2001 14:41:20 Members do not see ads below this line. - Help Keep This Site Online - Signup |
I assume you know how to run the ACC self-test. I mechanically disconnect the servo (but keep it connected electrically) and run the self test to make sure it runs, and that the Self-test passes. If not, then there is a problem in the servo or ACC.
From your post it appears that the mechanic is telling you what to replace, but replacing those parts doesn't help. That doesn't mean there is a problem in the ACC - it just may be that the mechanic needs replacement.
If you run the ACC, at least one of the servos should run. You can then test the other servos by swapping them out with the one that runs. If the servos check out, but don't run when installed where they should go, then it might be the ACC.
If the servos run when they're not mechanically connected, but don't run when the linkages are connected, make sure the linkages aren't binding.
, Thu, 3 May 2001 08:52:44, Fri, 4 May 2001 16:25:39 <-- Viewing This Message
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
 |
 |
 |
 |
 |
