In Reply to: Did you measure the resistance of the temp sensor?, Bill Homer [Profile/Gallery] , Tue, 6 Jan 2009 16:16:51

Actually, I removed the sensor from the engine and cleaned all of the sediment build up from the sensor. On the 2.3L engine the sensor is located beneath the fuel rail making it very difficult to get probes on it to measure resistance. I did disconnect the sensor and attach the wires to a spare sensor that I had from a 9000. It made no difference.

• The Agony of defeat!! The 94 900S beat me., GaryJ, Tue, 6 Jan 2009 11:04:24
  • CPS? (+), vvk, Thu, 8 Jan 2009 06:27:07
    • Yes, that was the 1st thing I replaced, GaryJ, Thu, 8 Jan 2009 12:16:28
  • Sometimes, No Snaab, Wed, 7 Jan 2009 05:11:42
  • Did you measure the resistance of the temp sensor?, Bill Homer , Tue, 6 Jan 2009 16:16:51
    • Sensor Cleaning, GaryJ, Wed, 7 Jan 2009 04:29:16 <-- Viewing This Message
      • Multiple Sensors, Bill Homer , Wed, 7 Jan 2009 08:47:38
        • My efforts have been in sensor #1, GaryJ, Wed, 7 Jan 2009 10:24:59
          • A resistor is a resistor (w/ reasonable power rating), Bill Homer , Wed, 7 Jan 2009 11:31:09
            • Plugs have been wet when checked, GaryJ, Wed, 7 Jan 2009 11:48:08
              • OK, probably not a vacuum leak then, Bill Homer , Wed, 7 Jan 2009 13:56:22
                • AMM was from a recycler., GaryJ, Wed, 7 Jan 2009 15:55:07
                  • Well, discreet coils (not DICs) rarely fail, but.., Bill Homer , Thu, 8 Jan 2009 14:06:51
                    • I have never had a coil fail., GaryJ, Thu, 8 Jan 2009 15:43:12
                      • OK, let's rule out the coil, Bill Homer , Fri, 9 Jan 2009 14:55:56
                        • Bill, Apparently you know alot!!, GaryJ, Fri, 9 Jan 2009 21:14:57
                          • Re: Bill, Apparently you know alot!!, William DeShurko, Mon, 12 Jan 2009 18:49:48
                          • We have a Winner!!!, GaryJ, Sat, 10 Jan 2009 10:02:39
                            • Awesome!, Bill Homer , Sat, 10 Jan 2009 11:56:25
    • Did you check all vacuum hoses for leaks?, Bill Homer , Tue, 6 Jan 2009 16:21:14
  • Re: The Agony of defeat!! The 94 900S beat me., Wayne, Tue, 6 Jan 2009 16:02:59
    • Forgot to mention the starting fluid, GaryJ, Wed, 7 Jan 2009 04:23:44
  • Not you, too!, Scaniac, Tue, 6 Jan 2009 15:10:54
    • I didn't need the frustration., GaryJ, Tue, 6 Jan 2009 16:07:17
      • Re: I didn't need the frustration., Scaniac, Tue, 13 Jan 2009 19:41:37

No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.

• Prev by Date: Forgot to mention the starting fluid, GaryJ, Wed, 7 Jan 2009 04:23:44
• Next by Date: Had a similar problem, No Snaab, Wed, 7 Jan 2009 05:00:12
• Main NG900 & OG9³ Bulletin Board

StateOfNine.com

SaabClub.com

Jak Stoll Performance

M Car Covers

Ad Available

The content on this site may not be republished without permission. Copyright © 1988-2026 - The Saab Network - saabnet.com.
For usage guidelines, see the Mission & Privacy Notice.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]

Random Saabnet.com Member Gallery Photos (Click Image)