1994-2002 [Subscribe to Daily Digest] |
[Main NG900 & OG93 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Clutch... and what else? Posted by turboSTEVE [Email] (#341) [Profile/Gallery] (more from turboSTEVE) on Mon, 13 Jan 2014 13:43:02 In Reply to: Re: Clutch... and what else?, Saabnutt, Tue, 30 Aug 2011 07:38:54 Members do not see ads below this line. - Help Keep This Site Online - Signup |
Just about to drop subframe when I ran across your post...
Can you give a little more detail, or suggested procedure, for reference marks?
I presume that there is some play in the bolt holes in the sub-f, so alignment would likely be affected if not reinstalled in same position.
Also, any advice on the downpipe nuts? These were 13mm, but I hammered an 8mm wrench on what was left of the bottom nut, still not budging. No room to get much of a tool down there with the pipe still connected ('01 has the pre-cat). About to get out the cutting tool.
'01 9-3 with bad diff - purchased as winter project
Thanks,
Steve
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.