[Subscribe to Daily Digest] |
[Main Performance Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Ok check this out, I'm stumped???? Posted by Inga [Email] (#2994) [Profile/Gallery] (more from Inga) on Mon, 16 Apr 2007 18:35:55 In Reply to: Re: Valve Damage?????? Can you check for that with a, Bryan [Profile/Gallery] , Mon, 16 Apr 2007 16:44:56 Members do not see ads below this line. - Help Keep This Site Online - Signup |
I set the cams AGAIN and turned the eng 2 times around. (for the record I marked the chain with a white paint pen and turned till I saw it twice. I checkde the flywheel all along the way.) The fly whel back to 0tdc and the cam marks are not even showing up?? What am I doing....or not doing?
Recap: I pulled the tensioner set the ext cam, pulled the chain tight. Bolted the sprocket in and then set up the intake getting the marks almost dead on. (maybe a hair off.) Then bolted the sprocket in. Last I re-installed the tensioner. I even tried to push the arm of the tensioner out to make sure it fully extented. Every step checking the flywheel. Then I turned the eng over twice.
Also I checked to see if the tensioner was all the way out and it wasn't, it still had a little bit more to go.
At the end of this day, Why or How would I get to be so far off???
Tim
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.