[Subscribe to Daily Digest] |
| [Main Performance Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
I grab the peg with a set of vise grips &...... Posted by jak [Email] In Reply to: timing, long., Simon S, Thu, 7 Oct 2004 12:27:42 Members do not see ads below this line. - Help Keep This Site Online - Signup |
bend the peg away from the step in the arm by putting one jaw on top of the peg & the other jaw on the rivit on the back side
bend the peg so the gap between the peg & the retard stop is about twice the OE gap eyeballing it
with a basicaly stock car with the APC turned up use a bike pump & put pressure on the hose to the vacum diaphram at least 10 PSI no more than 30 PSI set the timing to 10-11 BTDC than release the pressure & re check the timing it will be around 19-21 BTDC
this works great
take care
JAK
posted by 68.119.228...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |
