[Subscribe to Daily Digest] |
![]() | [Main Performance Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: A 3.5 bar or a 4 bar FPR for a . . . Posted by jak [Email] ![]() ![]() In Reply to: A 3.5 bar or a 4 bar FPR for a . . ., Czar, Wed, 20 Apr 2005 18:57:37 Members do not see ads below this line. - Help Keep This Site Online - Signup |
it sounds ike its easy enough to change if you failed you could allways put the old one back in
I think though that even though this mod brings a substantial increase in fueling probably about 4 lbhr per injector, the ECU will probably be able to compensate & keep closed loop operation at idle & part throttle it will just be wenthe WOT map is acsessed & it goes into open loop that you will get more fuel
the problem with running realy high line pressures though is that the pump starts to fall on its face above 75PSI & definatly running more than 80PSI is just a bad idea in my opinion
but by reading in that post it sounds like there are guniea pigs before you :-) so thats good :-)
take care
JAK
posted by 68.119.22...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |