2003-2011 [Subscribe to Daily Digest] |
Ok all you need is a 3/4" tee on to sides and the perpendicular to be a 1/4 Barb bread into a half inch. Grab some screw type hose clamps and a box of the black tape you but at any auto part store for tailor hoses etc.. it bonds to itself. Also some sealant white take for plumbing. Then two make 3/4" steel pipe nipples. Wait all your ends in plumbing sealant tape then the 3/4" nipples to but also add the radiator hose tape and wrap it around 5x get appropriate hose clamps that is a Missy having the screw type and clamp those down. I still had the end inside the turbo hose I wrapped it too or you could go to 3/8" if you want to get technical but all ends either way wrapped and with radiator take then clamped work super well. Or just wait for an own online this is just pinch deal.
posted by 172.56.21...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.