1979-1993 & 94 Conv [Subscribe to Daily Digest] |
[Main C900 Bulletin Board | BBFAQ |
Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
sandpaper? Posted by vvack0matic [Email] (#1443) [Profile/Gallery] (more from vvack0matic) on Sat, 28 Feb 2009 21:45:11 Members do not see ads below this line. - Help Keep This Site Online - Signup |
awhile ago i swapped out my clutch plates, basically im running with a new clutch plates
however i did not resurface the flywheel.
later after a good 3 months the clutch plate started to slip when the motor is boosted with 15 or more psi of boost
what im wondering is the fastest and easiest way to fix this problem of slipping. it dawned on me to use sandpaper thinking around 120 grit and sand the flywheel and plate to take the glaze off the both of them to get the grab when under high boost,
of course this is just a theory on a way to go bout the slipping
and am wondering is it possible to slip a folded chunk of sand paper in-between the plate and flywheel.
start the motor and ride the clutch a bit to get around taking the clutch apart?
posted by 208.54.100...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.