[Subscribe to Daily Digest] |
Do you own calculations, read about this on your own... check the link at the bottom of this post. do your own research and see how many different intake cam specifications are listed for the 85t exhaust cam itself, most commonly
51* open 10* close, WHICH IS NOT what the factory manual simon posted showed:
51* open 16* close should be the correct timings for 85t exh cam...
anyways...
the link at the bottom has more info... and here are my numbers again
_______________________________________________________________________
86- early 89 Turbo intake cam / WITH 85 turbo exhaust cam
Intake Duration of 252.00 degrees.
The Exhaust Duration is 252.00 degrees.
Overlap of 32.00 degrees
The Inlet Cam has an Installed Centerline of 110.00 degrees ATDC.
The exhaust cam has an Installed Centerline of 110.00 degrees BTDC.
110+110/2 = A lobe separation of 110 Degrees
________________________________________________________________________
86-early 89 TURBO intake cam / WITH 86+up TURBO STOCK exhaust cam
Intake Duration of 252.00 degrees.
The Exhaust Duration is 254.00 degrees.
Overlap of 29.00 degrees
The Inlet Cam has an Installed Centerline of 110.00 degrees ATDC.
The exhaust cam has an Installed Centerline of 114.00 degrees BTDC.
110+114/2 = A lobe separation of 112 Degrees
_______________________________________________________________________
NA intake from all 2.0i, 2.1i, and 89+up 2.0TURBO / WITH 86+ turbo exh cam
Intake Duration of 240.00 degrees.
The Exhaust Duration is 254.00 degrees.
Overlap of 29.00 degrees
The Inlet Cam has an Installed Centerline of 104.00 degrees ATDC.
The exhaust cam has an Installed Centerline of 114.00 degrees BTDC.
104+114/2 = A Lobe separation of 109 degrees
_________________________________________________________________________
NA intake from all 2.0i, 2.1i, and 89+up 2.0TURBO / WITH 85 turbo exht cam!
Intake Duration of 240.00 degrees.
The Exhaust Duration is 252.00 degrees.
Overlap of 32.00 degrees
The Inlet Cam has an Installed Centerline of 104.00 degrees ATDC.
The exhaust cam has an Installed Centerline of 110.00 degrees BTDC.
104+110/2 = A Lobe separation of 107 Degrees
http://beaudreau.50megs.com/SAAB/camdata.html
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.